The Audioengine S6 redefines performance - size ratio. Housed in a compact yet powerful package, this subwoofer packs 210 watts of peak power, fitting seamlessly into almost any space. Whether it's your desktop, home theatre, or gaming area, the S6 is the go - to choice for outstanding bass extension. Its front - firing woofer in a sealed box produces deep, smooth, and impactful bass that will exceed your expectations. Specifications include a Class D amplifier, a 15mm thick MDF cabinet, and a 6 - inch custom front - firing woofer. With 210 W peak power (140 W RMS, AES), it offers great power output. It has multiple inputs like 3.5 mm stereo mini - jack and RCA L/R, and can handle 100 - 240 V AC, 50/60 Hz auto - switching. It features high signal - to - noise ratio, a wide frequency response, and various protection mechanisms. It has low standby consumption and offers 0 / 180 degrees phase adjustment. Measuring 10″ (H) x 8.7″ (W) x 10″ (D) and weighing 15.4 lb, it's a convenient addition to your audio setup.
Using the Audioengine S6 is easy. First, connect it to your audio source. You can use the 3.5 mm stereo mini - jack or the RCA L/R inputs depending on your device. Make sure the power source is within the 100 - 240 V AC range, as it has auto - switching for 50/60 Hz. Adjust the crossover frequency between 40Hz and 130Hz to match your audio system. You can also set the phase to 0 or 180 degrees as needed. When it comes to placement, put it in a spot where it can freely spread the bass, like near your speakers. Keep in mind, don't block the front - firing woofer. For maintenance, keep the subwoofer clean. Wipe it with a soft, dry cloth regularly. Avoid exposing it to extreme temperatures or humidity. If you notice any issues like unusual sounds or power problems, check the connections first. If the problem persists, it's best to contact the manufacturer for help.
