The ADAM Audio Sub10 Mk2 is an outstanding active studio subwoofer. It can significantly enhance the low - frequency performance of any near or midfield monitoring system, reaching down to an impressive 25Hz. This subwoofer features a robust special woofer with extended cone travel and a heavy - duty coil, fine - tuned for accurate bass reproduction in a bass reflex enclosure. The down - firing bass reflex tube, thanks to its large size and unique shape, effectively reduces ventilation noise. The PWM amplifier is highly efficient, over 90%, and can handle demanding audio passages without overheating for long periods. An extra output allows you to connect multiple subwoofers as required. With a precise combination of a low cutoff frequency of - 3 dB at 25Hz and an undistorted high sound pressure level of 113dB at 1m, it delivers exceptional audio quality. Key features include a 10 - inch paper subwoofer, an amplifier with 200W RMS / 300W music power, a frequency response from 25 Hz to 150 Hz, and a max peak SPL at 1 m of ≥113 dB. Specifications: rear panel, 25 Hz – 150 Hz frequency response, 10 - inch paper cone drivers, analog XLR/RCA audio input connectors, PWM amplification, comes with a power cord and manual, dimensions of 560mm (H) x 300mm (W) x 400mm (D), and a weight of 46.3 lb (21 kg).
Using the ADAM Audio Sub10 Mk2 is quite straightforward. First, connect it to your monitoring system using the analog XLR or RCA audio input connectors. Plug in the power cord to a suitable power source. Once it's on, you can adjust the settings according to your audio needs. For best results, place it on a stable surface. When using multiple subwoofers, you can use the additional output to cascade them. As for maintenance, keep the subwoofer clean by gently dusting it regularly. Avoid exposing it to extreme temperatures, humidity, or direct sunlight. If you're not using it for a long time, unplug the power cord. And always follow the instructions in the manual for any specific technical details or troubleshooting.
