The DigiTech CabDryVR pedal is a game - changer for guitarists. It brings the authentic sound of a miked - up speaker cabinet right to your pedalboard. You can directly pipe the big - stage sound into your DAW, mixing board, or in - ear monitors. With dual independent inputs and outputs, it offers great flexibility. You can set up two different cabinet models, send a dry signal to your amplifier while routing the simulated cab sound to your audio interface for recording or to a direct box for the PA system. There are 7 guitar and 6 bass cabinet impulse responses to choose from. The patented Cabinet Tuning control lets you adjust the cab's depth, and each channel has an output level control. You can even use different IR models on each channel, mimicking the effect of two miked - up cabinets without the hassle of moving a lot of gear. The CabDRY VR has True Bypass, so it won't alter your original signal and can be removed when using piezo pickups.
Using the DigiTech CabDryVR pedal is easy. First, connect it to your pedalboard. You can use the dual independent inputs and outputs to set up different cabinet models or send signals as you like. For example, you can send a dry signal to your amplifier and the simulated cabinet sound to your audio interface for recording. To choose an impulse response, just select from the 7 guitar and 6 bass options available. Use the Cabinet Tuning control to adjust the depth of the cabinet sound, and the output level control on each channel to set the right volume. When it comes to maintenance, keep it in a dry place. Wipe it gently with a soft cloth if it gets dirty. Since it has True Bypass, it won't change your original signal, but remember you can remove it from the chain when using piezo pickups. This way, you'll always get the best performance from your pedal.
