The Fender Hot Rod DeVille ML amplifier is a masterpiece inspired by the legendary guitarist Michael Landau. Known for his rich and expressive tones, Landau has relied on Hot Rod DeVille amps on stage for years. This new ML model, designed in collaboration with Landau, is based on the Fender Hot Rod DeVille III. It features tube circuitry, a 60 - watt output, two 12' Celestion® V - Type speakers, spring reverb, and an effects loop. What sets the ML version apart are its cool features like volume - switching and boost capabilities. With 60 watts of power, two separate volumes with a clean boost on volume two, internal variable bias control, an effects loop, bright switch, and Fender spring reverb, it's a must - have for guitar players.
Using your Fender Hot Rod DeVille ML amplifier is easy. First, plug it into a 230V UK power source. You can choose between the two selectable channels using the volume select switch. Use the two 1/4' inputs to connect your guitar, with Input 2 operating at - 6dB. Adjust the controls like volume, treble, bass, middle, reverb, and presence to get your desired sound. The effects loop allows you to add external effects. Remember to use the included 2 - button footswitch for easy control. When it comes to maintenance, keep the amplifier in a dry and clean place. Avoid exposing it to extreme temperatures or humidity. If you need to clean it, use a soft, dry cloth. The preamp tubes (3 x 12AX7) and power tubes (2 x 6L6) will need replacement over time. Refer to the owner's manual for detailed instructions on tube replacement. Also, use the fitted amplifier cover when the amp is not in use to protect it from dust.
