This is a top - notch replacement stylus for the Audio - Technica AT3600L cartridge. Since 1962, Audio - Technica has been at the forefront of perfecting transducer technology, starting with our first hand - crafted phono cartridge. Removing the old stylus is easy. Just hold the cartridge with one hand, grip the plastic stylus housing with your thumb and forefinger, and gently pull it away at a slight angle as shown by the arrow. Installing a new stylus is a breeze too. Insert the new stylus assembly into the cartridge at a slight angle so the hook at the end fits into the slot in the cartridge body. You'll hear a click when it's fully seated, and it must be fully seated for proper operation. The stylus has a conical shape and a dimension of 0.6 mil.
Hey there! Using this Audio - Technica ATN3600L replacement stylus is super simple. When it's time to replace the old stylus, hold the cartridge steady in one hand. Then, use your thumb and forefinger to grab the plastic stylus housing and pull it away gently at the angle shown by the arrow. To put in the new stylus, just insert it into the cartridge at that same slight angle. Make sure the hook at the end fits into the slot in the cartridge body. You'll know it's in place when you hear a click. Remember, it has to be fully seated for the stylus to work right. As for maintenance, keep it clean. You can use a soft brush to gently remove any dust or debris. And always handle it with care to avoid any damage. That's all you need to know to get the most out of your new stylus!
