Get an exact re - creation of the 70’s 'System 2500' circuitry that fits right into a standard Eurorack case, all at a super - affordable price. Whether you want to blend the MODAMP MODULE 1005 with your current setup or start your modular synth adventure, you're in for a great time. Features include a classic 1970s analog ModAmp module, an authentic replication of '2500' Series circuitry. It has a discrete balanced modulator and VCA. The balanced modulator takes 2 input signals (DC to 20 kHz) and multiplies them for the output. It can generate complex waveforms with in - harmonic overtones. There are 2 precision voltage outputs for VCO frequency control. Modulation is activated by illuminated push buttons. In Unmod mode, input A signal goes to output without modulation, and level is set by Unmod Gain control. You can switch modulation on/off with trigger or gate signals. The VCA takes the modulator output and adjusts the signal level based on Gain control and external voltages. Two external VCA control signals can be adjusted via front - panel controls. You can choose between exponential or linear VCA modes. Eurorack specs: 16 HP, XX mA +12 V, XX mA - 12 V.
Using this Behringer 1005 Modamp Ring Modulator and VCA Eurorack Module is easy. First, if you're starting a new modular synth setup, just install it in a standard Eurorack case. If you're adding it to an existing rig, connect it properly to your other modules. When it comes to using the modulation features, use the illuminated push buttons to activate or deactivate modulation. In Unmod mode, adjust the Unmod Gain control to set the signal level. You can also use trigger or gate signals to switch modulation on and off. For the VCA, it takes the output from the modulator and modifies the output signal level. Use the front - panel controls to adjust external VCA control signals and choose between exponential or linear VCA modes. As for maintenance, keep it in a dry and clean environment. Avoid exposing it to extreme temperatures or humidity. If you're not using it for a long time, store it properly. When connecting or disconnecting cables, do it gently to avoid damaging the module.
