The 5150III® 50W EL34 head offers independent volume and gain control for all three channels. It has the same cool looks and fierce EL34 tone as the 100 - Watt head, giving you total control. The EL34 power tubes produce signature harmonic overtones, with dynamic compression and saturation for a modern 'British' sound. It has the sustain and versatility you expect from EVH® 5150III® amps. Channel one has a sparkling, compressed clean tone. Channels two and three have a slightly darker, more saturated compressed tone. Channels one and two have dual concentric gain/volume controls with shared EQ, while channel 3 has its own EQ. There's also a rear - panel resonance control for low - frequency response and a global presence control. Wrapped in an elegant gold and black EVH design, it comes with an effects loop, headphone jack, pre - amp out, and midi - in. Specifications: Tube amplifier, three channels, solid - state rectifier, 50 watts, 7 x JJ ECC83S (12AX7) pre - amp tubes, 2 x JJ EL34 Matched power tubes, and a 4 - Button Footswitch.
Using this EVH 5150 III 50W EL34 tube guitar amplifier head is easy. First, connect your guitar to the 1/4' input. You can use the independent volume and gain controls on each channel to get the sound you like. If you want to add effects, use the 1/4' effects loop. For private practice, plug your headphones into the 1/4' headphone jack. When it comes to the EQ, channels one and two share low, mid, and high settings, while channel 3 has its own. Adjust the rear - panel resonance control to fine - tune the low - frequency response. The global presence control helps you balance the overall sound. As for maintenance, keep it in a dry and clean place. Make sure to turn it off when not in use. If you need to move it, handle it carefully to avoid damaging the tubes. And if you want to control different functions, use the included 4 - Button Footswitch.
